|
|
RUSH MODEL 132C BENCH TOP DRILL AND TOOL GRINDER SERIAL NUMBER: 2393 Specifications: Drill And Tool Size Capacities: Drill Diameter Range: 0.080" To 1 1/4" Tool Shanks: Straight Shanks: .080" To 1 1/4" Morse Taper Shanks: To #4 Maximum Drill Length: 14", 22" With Optional Spindle Extensions Not Included. For Most Drills Less Than 3/4" Diameter, Almost Any Length Can Be Accommodated. Drills Over 3/4" Diameter And Over 22" Long Can Be Ground, In Some Cases. Maximum Diameter Of Tools Other Than Drills: 2 1/2" With A Maximum Shank Diameter Of 1 1/4" Maximum Length Of Tools Other Than Drills: 5" Excluding The Tool Shank Basic Drill And Tool Sharpening Capabilities: Drill Sharpening (Right Or Left Hand), Note: For All Left Hand Tools, Optional Cams Are Required) A) Point Angle Range: 40 To 180+ Degrees B) Number Of Flutes: 2, 3 And 4 C) Flute Types: Spiral (Slow, Standard And Fast) And Parabolic D) Shank Types: Straight And Morse Taper Nos. 1, 2, 3 And 4 E) Point Types: Conventional, Split Point, Lip Corrected, Web Thinned, Spiral Point*, Sheet Metal*, Double Angle, 4 Facet, Flat Bottom, Structural Steel* And Plastic Point, (*Optional Cam Required, Not Included) F) Step And Subland: Sharpen Point And Step Counersink Sharpening: (Evenly Spaced Flutes Only) Number Of Flutes: 1, 2, 3, 4, 5*, 6*, (*Optional Cam Required, Not Included) Tap Sharpening: Sharpens The Tap Chamfer Straight Flutes (For High Spiral Taps-Bottoming Chamfer Only) Number Of Flutes: 2, 3, 4, 5*, 6*, 7* And 8*, (*Optional Cam Required, Not Included) Reamer Sharpening: Sharpens The Reamer Chamfer Number Of Flutes: 4, 5*, 6*, 7*, 8* And 10* (*Optional Cam Required, Not Included) End Mill And Counterbore Sharpening Number Of Flutes: (End Sharpening) Center Cutting: 2 And 3 Non Center cutting: 4 On End Grind: Primary, Secondary And Gash In One Set Up End Mill O.D. Grinding, (Any Number Of Flutes), With Optional Air Bearing Grinding Attachment, (Not Included) Spin And Index Grinding: Spin Grind: Straight (I.E. Drill Shanks And Pilots), Chamfer (Adjustable Angle) And Square End Index Grind Flats: With Integral 12 Position Indexing Plate Grind Most Tool Materials (I.E. High Speed Steel, Cobalt High Speed Steel And Tungsten Carbide) With The Use Of The Properly Selected Grinding Wheels Price For New Manual Bench Top Version From Rush: $4,990.00 USD Book With Safety, General Description, Maintenance Procedures, Etc. And Demo Video From Rush Included Approximate Dimensions On Pallet: 34" x 41" x 25" H Approximate Weight On Pallet: 300 Lbs. Specifications Are Subject To Verification (INVENTORY #12852) |
|
|
|