 Click to see video of this machine |
|
|
PRATT & WHITNEY MODEL B-12 12" VERTICAL SHAPER SERIAL NUMBER: 54070 RUNS GOOD! * SEE UNDER POWER VIDEO * Approximate Year: 1979 Specifications: Range: Stroke Of Ram: 0 To 12", (Actual Maximum 12 1/2") Table Top To End Of Ram, Maximum (Longest Stroke): 28 1/4" Table Top To End Of Ram, Maximum (No Stroke): 22 1/4" Table Top To Lower End Of Ram Bearing: 17" Vertical Adjustment Of Ram: 16 1/8" Column Face To Tool Post Seat: 21 7/8" Power Rotary Table Diameter: 24" Longitudinal Travel Of Table, Maximum: 25" Transverse Travel Of Table, Maximum: 25" Angular Adjustment Of Ram: 0 To 5 Degrees Tool Post Takes Tools: 7/8" x 1 3/4" Size Of T-Slots (3 Parallel & 1 At Right Angle): 13/16" Center To Center Distance Of Parallel T-Slots: 6" Speeds: Cutting Strokes Of Ram Per Min. (4 Speeds): 19, 31, 48, 76 Driving Pulley Speed: 440 RPM Feeds: Longitudinal & Transverse Power Feeds: .0021" To .0833" Rotary Power Feed (On 10" Radius): .0043" To .1745" Micrometer Dial Of Rotary Table Feed Graduated To: 1 Min. Micrometer Dials For Longitudinal & Transverse Feeds Graduated In Thousandths Equipped With: Anilam Mini Wizard Digital Readout, (Not Working) Rotary Table: 24" Miscellaneous Wrenches 5 HP, 220/440 Volt, 3 Phase Electrics, (Currently Wired For 440 Volts) Versatile, Powerful, Accurate . . . Handiest Machine In The Shop . . . Much More Than A Slotter . . . Efficiently Handles A Wide Variety Of Irregular Shapes Vertical Design Eliminates Springing, Assures Permanent Accuracy Cutting Action Tends To Hold Work In Place This Machine Is A Business Within A Business. This Machine Will Do Keyways, Slotting & Shaping. Some People Have Actually Run An Entire Business With One Slotter Like This. Approximate Dimensions: 90" FB x 66" LR x 91" H Approximate Weight: 9,000 Lbs. Specifications Are Subject To Verification (INVENTORY #12840) |
|
|
|
|
|
|