|
|
G & B 1000 TON HYDRAULIC DOWNSTROKING POWDER METAL COMPACTING PRESS WITH FLOATING DIE TABLE SERIAL NUMBER: 311-327 Approximate Year: 1968 Specifications: Pressing: 1,000 Tons Stripping: 25 Tons Maximum Depth Of Fill: 6" Maximum Rectangular Mold Dimensions: 6" x 10" Maximum Die Size: 6" x 10" x 6" Deep Bed: 52" FB x 31" LR, Bolster Stroke Of Ram: 12" Frame: 39 9/16" FB x 31" LR Ram: 34 1/2" FB x 47" LR Upstroke Of Bolster: 6" Daylight Over Bolster: 21" Bolster On Bed: 6" Daylight Of Ram Up To Bottom Frame Of Press: 37" Ram Diameter: 12" Press Speeds: Closing: 40 IPM Pressing: 4 IPM Opening: 45 IPM Equipped With: Adjustable Gibb Guided Ram, 4 Wedge Type Gibs Gib Adjusting Bolts Solid Window Frame Design, 4" Wide Ways 12" Down Stroke At 1,000 Tons And Upstroke Of 12" At 150 Tons Shuttle Feed Table Hydraulic Floating Die Table, Supported By 4 Hydraulic Cylinders, With Automatic Filling Cup Moving Crosshead Steel Slab Construction Adjustable Gibs Wear Plates To Prevent Any Permanent Wear On The Bolster Plate Racine Pump & Tank Racine Hydraulic Valve Pumps JIC Electrics 30 HP Hydraulic AC Motor (Pump), 1180 RPM, 76 Amps Floor Standing - No Pit Required This Hydraulic Press Was Last Used On A Powder Metal Project Making Grinding Wheels Made By G & B Industrial Project Consultants, Ltd. Copy Of Maintenance Manual And Miscellaneous Prints Included Approximate Dimensions Of Press: 84" FB x 115" LR x 11' 7" H Approximate Dimensions Of Hydraulic Tank: 44" x 81" Approximate Weight: 34,000 Lbs. Specifications Are Subject To Verification (INVENTORY #12818) |
|
|
|
|
|
|