|
|
CLAUSING KONDIA TYPE FV-1 3 HP 9" X 48" VERTICAL MILL SERIAL NUMBER: Y-137 RUNS GREAT! ORIGINAL PAINT! Approximate Year: 1993, Installed 1994 Specifications: Table: 9" x 48" Cross Travel: 14" Vertical Travel: 17" Quill Travel: 5" (3) Quill Power Feeds: .0015, .0028 And .0047 Spindle Speeds: Lot 60-500/Hi 500-4,000 RPM Maximum Distance Under Spindle Nose: 18 1/4" Spindle Nose: R-8 Head Tilts: Left To Right: 90 Degrees Front To Back: 45 Degrees Turret Swings Left To Right: 90 Degrees Dovetail Ram Travel: 23" Equipped With: Hardened Cross Ways Dual Table Locks Dual Knee Locks Power Feed Engagement Lever Power Feed Reversing Knob One Shot Lubrication System Knee Handle Quill Handle Draw Bar Rear Way Splash Cover Work Lamp On Board Auxiliary Outlets Built In Coolant In Base, (No Pump) Built On Electrical Panel With Forward And Reversing Motor Starters 3 HP, 2.2 KW, 230/460 Volt, 1,700 RPM, 3 Phase Motor, (Currently Wired For 460 Volts) Note: Servo Table Feed Needs Repair This Is Not A Bridgeport Mill, As It Is Built Heavier In Weight And Design Approximate Dimensions: 70" D x 62" W x 83" H Approximate Weight: 2,750 Lbs. Specifications Are Subject To Verification (INVENTORY #12813) |
|
|
|
|
|
|