 Click to see video of this machine |
Click to see video of this machine |
|
|
OKAMOTO TYPE ACC-12-24ST 12" X 24" AUTOMATIC SURFACE GRINDER SERIAL NUMBER: 83557 RUNS GOOD! * SEE UNDER POWER VIDEO * Approximate Year: 2000 Specifications: Maximum Grinding Fine Line Chuck Size: 12" x 24" Maximum Distance Under Wheel: 13.6" Distance To Center Of Spindle: 17" Table Load Capacity: 924 Lbs. Maximum Longitudinal Travel: 29.5" Maximum Cross Travel: 13.4" T-Slots, (Number x Width): 1 x 0.669" Feeds: Longitudinal Movement Of Table: Hydraulic Feed: 1-82 Ft/Min Hand Feed: 1.85" Per Revolution Cross Movement Of Saddle: Hydraulic Intermittent Feed: 0.02-0.8" Hydraulic Continuous Feed: 4-40 In/Min. Hand Feed Per Revolution: 0.25" Graduation Of Handwheel: 0.001" Vertical Movement Of Wheel Head: Automatic Feed Per Table Stroke: 0.0001- 0.0015" Automatic Feed Per Saddle Reversal: 0.0001- 0.0015" Hand Feed Per Revolution: 0.025" Minimum Hand Fine Feed: 0.0001" Graduation Of Handwheel: 0.0001" Rapid Feed (50/60 Hz.): 16/19 In/Min. Grinding Wheel: Diameter: 14" Width: 1.5" Bore: 5" Speed (50/60 Hz.): 1500/1800 RPM Equipped With: Power Down Feed Electro-Magnetic Fine Line Chuck, Variable Holding Chuck Control (5) Floor Pads Extra Wheel Mount Control Panel Coolant With Paper Filtration 4 HP, 3.7 KW, Multitap 208/230/240/460/480 Volt, 1740 RPM, 3 Phase Motor, (Currently Wired For 480 Volts) Copy Of Instruction Manual Included Approximate Dimensions Of Machine: 70" D x 102" W x 74" H Approximate Dimensions Of Coolant Tank: 51" L x 23" W x 27" H Approximate Total Weight: 4,180 Lbs. Specifications Are Subject To Verification (INVENTORY #12807) |
|
|
|
|
|