|
|
PEDDINGHAUS 55 TON TYPE 210/13 HEAVY DUTY IRONWORKER, (WEST GERMANY) SERIAL NUMBER: 773/4500 RUNS GOOD! Specifications With Standard Blade: Punch Tonnage: 55 Tons Throat: 24" Depth Plate Shears/Flat Bar Shears: Plates: 1/2" Flats: 6 x 5/8" Length Of Blade: 10" Work Height: 26 5/8" Shear, 36" At Punch Section Shear: L-Steel 90 Degrees: 4" x 4" x 1/2" L-Steel, Unequal Legs 90 Degrees: 5" x 3" x 3/8" L-Steel, Mitre Cut 45 Degrees: 3 1/2" x 3 1/2" x 5/16" T-Steel 90 Degrees: 4" x 4" x 3/8" T-Steel 45 Degrees: 3" x 3" x 3/8" Working Height Including Foundation: 41" Barstock Shear: Round Stock: 1 5/8" Square Stock: 1 1/2" Working Height Including Foundation: 32" Notcher With Square Notcher: Plate: 7/16" L-T-Steel: 3" x 3/8" L-I-Steel, Flange Up To Stand Sect: 3" To 6" Notching Width: 2" Notching Depth: 3 5/16" Working Height Including Foundation: 41" Punch: Punching Force: 55 Tons Stroke: 1" Punching Performance: 1" x 5/8", Or Up To 13/16" x 3/4" T-Steel, Flange: 3 To 15 I-Steel, Flange: 3 To 15 C-Steel, Web: 3 To 15 I-Steel, Web: 3 To 15 WF Shapes, Web: 8-40 Lbs. WF Shapes, Flange: 21-62 Lbs. Working Height Including Foundation: 37 5/8" Approximate Stroking Rate Sect. Shears: 32 Per Minute Minimum Approximate Stroking Rate Punch: 37 Per Minute Minimum Foundation Height: 13 3/8" Standard Throat Of Punch: 14" Equipped With: (1) Punch And Cap And (2) Bottom Die Mounts 3 HP, 220/440 Volt Motor, (Currently Wired For 220 Volts) Note: This Peddinghaus Ironworker Is Missing One Angle Blade Which Is Available From Peddinghaus Copy Of Operating Instructions Included Approximate Dimensions: 65" x 28" x 74" H Approximate Catalog Weight: 4,300 Lbs. Specifications Are Subject To Verification (INVENTORY #12802) |
|
|
|
|
|
|