 Click to see video of this machine |
|
|
ANJO MODEL J8C-320 BORING, DRILLING, MILLING MACHINE, (NEW) SERIAL NUMBER: 259 NEW - NEVER MADE A CHIP! RUNS GOOD! * SEE UNDER POWER LIVE VIDEO OF THIS MACHINE * Specifications: Capacities: Drilling: 2 1/2" Threading: 1 1/2" Boring: 5" Distances: Column To Spindle: 11 7/8" Spindle To Table: 25" Travels: Head, (Vertically): 19 3/4" Table, (Longitudinal): 25 5/8" Table, (Cross): 11 7/8" Spindle: American Standard No. 50 Table Size: Slotted, (Wet) 11 7/8" x 43 3/8" Feeds: Table: (10) 10-418 Minimum Spindle: (5) .05, .1, .15, .25, .3 IPR (12) Spindle Speeds: 62 To 2,160 RPM Equipped With: Pendant Controls Direct Gear Driven Head Feed In Vertical And Longitudinal Directions Square Column, (Wide Ways) Counterbalance Spring For Automatic Return Of Head Headstock Slides On Enclosed Rollers Fully Protected Ways On Vertical Column Heavy Duty Spindle Mounted On Precision Roller Thrust Bearings, (Designed To Absorb Radial And Axial Thrust, Lubricated) Precision Spindle And Gears Hardened/Ground Endless Roller Cage, Fitted On The Back Of The Head For Slideways One Shot Lubrication Work Light, (With Transformer) Built In Coolant System Electrical Box Mounted On Back 1/8 HP Coolant Pump Motor 5 HP, 1,200 RPM Main Motor Voltage: 220/440 Volt, 3 Phase, (Currently Wired For 220 Volts) Sorry, There Is No Draw Bar For This Machine Dealer Cost When Purchased New: $25,000.00 USD Made In Spain This Anjo Boring, Drilling And Milling Machine Is Being Sold For Less Than Half Of The Price Of A New Bridgeport Mill Approximate Dimensions On Skid: 62" W x 64" D x 84" H Approximate Weight: 3,300 Lbs. Specifications Are Subject To Verification (INVENTORY #12801) |
|
|
|
|
|