|
|
CINCINNATI MODEL OE MONOSET TOOL AND CUTTER GRINDER SERIAL NUMBER: 2D1C1Y-117 RUNS GOOD! Specifications: Capacity: Swing Over Main Slide: 12" Maximum Length Between Spindle Nose And Tailstock: 6", (No Tailstock Included) Maximum Wheel Diameter: 3 1/2" Maximum Collet Work Diameter: 1 1/4" Minimum Collet Work Diameter: 1/8" Range: Longitudinal Movement Of Main Slide: 5 3/4" Offset Slide Movement, (Either Side Of Center): 2 1/4" Vertical Slide Travel Of Wheelhead: 4 1/4" Above Center, 4 1/2" Below Center Transverse Slide Travel Of Wheelhead: 7 1/2" Longitudinal Slide Travel Of Wheelhead: 6" Angular Range Of Workhead: In Horizontal Plane, (Workhead Swivel Base): 235 Degrees In Vertical Plane, (Workhead Angular Adjustment), Above And Below Center Position: 40 Degrees Speeds: Approximate Grinding Wheel Spindle, Two Speeds: 6,000 And 8,000 RPM Equipped With: (1) Diamond Wheel And Mount (4) Workhead Miscellaneous Collets Push Button Controls At Front Of Machine Cabinet Style Base Built In 220/440 Electrics In Base 1/3 HP, 220/440 Volt Spindle Drive Motor, (Currently Wired For 440 Volt) 1/15 HP Workhead Motor Approximate Dimensions: 46" x 38" x 56" H (Currently On 48" x 42" Skid Which Is Not Suitable For Shipping In An Enclosed Truck. If A Skid Is Needed, There Will Be An Additional Charge.) Approximate Catalog Weight: 1,350 Lbs. Specifications Are Subject To Verification (INVENTORY #12794) |
|
|
|
|