|
|
MYFORD MODEL MG12-HP 5" X 12" HYDRAULIC CYLINDRICAL GRINDER SERIAL NUMBER: HP68356 Great Grinder For Quantity Production Or Toolroom Work! Approximate Year: 1964 Specifications: Maximum Grinding Diameter: 3" Swing Over Table: 5" Capacity Between Center: 12" Approximate Maximum Table Travel: 14" Variable Hydraulic Table: 120 IPM Table Swivels (Both Ways): 10 Degrees Wheel Size, (New): 10" x 3" x 1.5" Variable Hydraulic Speeds Of Workhead: 100 To 900 RPM Plunge Feed, (Hyd. Variable): 0 To .025" Plunge Feed Rate: .0025 To .125 IPM Spark Out: 1 To 10 Seconds Table Movements: Variable Dwell At Each End, Automatic Infeed To Wheelhead Equipped With: Motorized Workhead And Automatic Cycles Plunge Feed Separate Hydraulic Tank And Pump Separate Coolant Tank And Pump Wheel Dresser On Tailstock 1/4 HP A.C. Workhead Motor 1/2 HP A.C. Hydraulic Motor 3 HP A.C. Wheelhead Motor 220 Volts, 3 Phase Parts And Service Available From Factory In New Jersey, U.S.A. Approximate Dimensions: Approximate Catalog Weight: 2,250 Lbs. Specifications Are Subject To Verification (INVENTORY #12792) |
|
|
|
|