 Click to see video of this machine |
|
|
HARDINGE MODEL HLV-EM SUPER PRECISION TOOLROOM INCH/METRIC SPEED LATHE SERIAL NUMBER: HLV-H-8949-T RUNS GOOD * SEE UNDER POWER VIDEO * Approximate Year: 1980 Specifications: Spindle Construction: Hardinge Precision Preloaded Ball Bearing Spindle Capacity: With Round 5C Collets: 1 1/16" With Jaw Chucks (Through Spindle): 1 5/32" Spindle Nose: Hardinge Tapered Swing Over Bed: 11" Swing Over Carriage: 9" Swing Over Cross Slide: 6" Distance Between Centers: 18" Hole Through Spindle: 1 1/4" Variable Spindle Speeds: Low 125-1,000 RPM Hi: 375-3,000 RPM (36) Metric Threads: .275 To 2.7 (36) English Threads: 11-108 Tailstock Spindle Nose: No. 2 Morse Taper Equipped With: Inch And Metric Threading And Feeds Buck 6" Diameter 3 Jaw Chuck, With Chuck Key Fully Enclosed Headstock Preloaded Ball Bearing Spindle Hardened And Precision Ground Taper Nose Spindle With 1 1/16" Collet Capacity 5C Lever Action Ball Bearing Collet Closer Motorized Carriage Powerful Endless V-Belt Drive Quick Change Gear Box With Changes For Precision Threading Only Completely Enclosed Carriage And Apron With Preloaded Bearings For Apron Pinion Gear Independent Electric Variable Power Feed Drive For Carriage And Cross Slide Finger Tip Snap-Up Clutches For Longitudinal And Cross Feed Solid Hardened And Ground Steel Dovetail Bed Ways Push Button Control For Variable Speed Drive Collet Rack With Miscellaneous Collets, (See Photo) Hardinge Model D9 Tool Post Trav-A-Dial Model 7A Push/Pull Stop For Main Motor Spindle Nose Guard Splash Guard Cabinet Base Miscellaneous Tooling, (See Photo), Including Dead Center, Live Center, Drill Chuck, Miscellaneous Drills, Cutters And Taps Built On Electrical Panel With Disconnect Two Speed Motor, 1 HP, 1740 RPM, 1/2 HP, 530 RPM, 230 Volt, 3 Phase Main Motor Approximate Dimensions: 34" D x 70" W x 58" H Approximate Weight: 1,700 Lbs. Specifications Are Subject To Verification (INVENTORY #12787) |
|
|
|
|
|
|
|