 Click to see video of this machine |
|
|
HILL ACME MODEL #4 HYDRAULIC IRONWORKER SERIAL NUMBER: 840403001V RUNS GOOD! * SEE UNDER POWER VIDEO * Hydraulic Self Contained Type All Steel Construction Approximate Year: 1984 Specifications: Tons: 58 Throat Depth On Punch End: 20" Maximum Length Of Stroke: 1 1/2" Punching: (See Tooling Photo With Punches & Blades Maximum Diameter Through Thickness: 1 1/16"- 11/16" tk, (27mm-17mm) Diameter Through Maximum Thickness: 1"-3/4" Shearing: Blade Length: 12" Flats: 5/8" x 7", 1/2" x 8", 3/8" x 8 1/2" Rounds: 1 3/4" Squares: 1 1/2" Angle (90): 4" x 4" x 1/2" Angle (45): 3" x 3" x 5/16" Tees: 3" x 3" x 3/8" Shear End Coping: Square Notch: 2 3/4" x 2 3/4" x 3/8" 90 Degree "V" Cope: 2 3/4" x 4" x 3/8", (No Blades) Flanges Of Beams And Channels: 4" To 7" 90 Degree "C" Notcher In Punch End Capacities: Flanges Of Beams: 3"-6" Flanges Of Channels: 3"-5" Angles: 3" x 3" x 5/16" Plates: 5/16" General: Strokes Per Minute Punch End: Maximum: 60 Strokes @ 1/2" Length Minimum: 30 Strokes @ 1/2" Length Die Working Height: 34 1/2" Equipped With: Mounting Cap, (See Photo) (5) Punch Sets: 3/8", 9/16", 3/4", 17/32" x 1" And 31/32" (2) Punches, (No Bottom Dies): 7/16" And 7/8" Complete Set Notch Blades, Part Numbers (1) A7683-1, (3) A5828-1, (See Photo) Jog Button With Up/Down Thumb Switch Adjustable Stroke Adjustable Stock Stop With Scale Blade Guards Foot Pedal Work Lamp Built On Electrical Cabinet With 220/440 Volt, (Currently Wired For 440 Volts) 110 Volt Control Voltage 7 1/2 HP, 1,170 RPM, 3 Phase Motor Approximate Dimensions: 6' x 3' x 6' 4" H Approximate Weight: 6,850 Lbs. Specifications Are Subject To Verification (INVENTORY #12781) |
|
|
|
|
|
|
|