|
|
CINCINNATI MILACRON HEALD MODEL 273-A UNIVERSAL ID GRINDER SERIAL NUMBER: 48197 RUNS GOOD! LATE MODEL WITH HYDROSTATIC WAYS Specifications: Maximum Swing Over Table: 20" Maximum Swing With Guards Fully Removed, Swing Over Pan: 27" Angular Adjustment Of Workhead: 90 Degrees Workhead Positioning Slide Travel: 17 1/2" Maximum Table Travel: 20" Maximum Grinding Stroke: 16" Wheelhead Cross Slide Travel: 1 1/2" Center Of Workhead Spindle To Floor: 43 1/2" Distance Workhead Flange To Edge Of Wheelslide: 0-29 1/16" Table Speeds For Grinding: 0-18 FPM Worhead Speeds-Reversible And Variable Between: 0-500 RPM Rapid Traverse Of Table: 18 FPM One Turn Of Cross Feed Handwheel: .050" On Dia. Cross Feed In Increments, At One Or Both Ends Of Table Stroke, (Adjustable): .0001"-.0005" Minimum Stroke: .125" One Turn Of Workslide Handwheel: .100" One Turn Of Table Handwheel: 3 3/4" Equipped With: Red Head 14,000 RPM Grinding Spindle (2) Extra Spindles, 7,500 And 12,500 RPM Buck 12" Diameter 3 Jaw Chuck, (Very Expensive!) Chuck Key 12" Diameter Face Plate Radius Dresser Workhead Motor: 1.5 HP, 0-220 Volt, Full Load Torque 2,700 Lb. In. Spindle Motor: 5 HP, 230-460 Volt, 3,500 RPM Hydrolic Pump Motor: 1/2 HP, 208-230/460 Volt, 1150 RPM (Machine Is Currently Wired For 440 Volts) Sorry, There Is No Coolant Tank With This Machine Approximate Dimensions: 64" D x 102" W x 76" H Approximate Weight: 6,500 Lbs. Specifications Are Subject To Verification (INVENTORY #12727) |
|
|
|
|
|