|
|
MOORE NO. 2 PRECISION VERTICAL JIG GRINDER SERIAL NUMBER: 7502 Specifications: Table Size: 10" x 19" Table Travel: 10 1/4" x 14 1/4" Maximum Height, Table Top To Wheel Chuck: 14 1/2" Spindle To Column Ways: 10" Spindle To Column Below Way: 13 1/2" Vertical Travel, Main Spindle Slide: 3 5/8" Vertical Travel, Main Spindle Housing: 10" (4) Main Spindle Speeds: 425, 575, 850 & 1,040 RPM Eccentric Offset Of Grinding Spindle: A) Rough Adjustment With Machine Stopped: 1 1/8" B) While Running By Tenths: .075" Grinding Capacity: With Diamond Charged Man- drels: 1/32" Or Less Up To 3/16", With Mounted Points Or Grinding Wheels: 3/16" Up To 5" Equipped With: Auto-Feed Air Control Auto-Feed Lubrication Work Light Way Covers Accessories And Supplies Factory Motor Specifications For Main Spindle & Vertical Power Feed: 1/4 HP, 220/440 Volt, 3 Phase, (Currently Wired For 220 Volts) The air-feed has a air blow by relief valve and is not letting the air feed work. The spindle drive is going up and down and is a little bit erratic. Both are believed to be easy fixes. We do not know the machine well enough to fix. It could be an adjustment in both cases. Approximate Dimensions Of Machine: 54" D x 44" W x 94" H Approximate Dimensions Of Cabinet: 55" x 18" x 44" Approximate Total Weight: 3,200 Lbs. Specifications Are Subject To Verification (INVENTORY #12720) |
|
|
|
|
|
|