Inventory Number	Description	Year	Asking Price
12694	Landis Model 1R 10" x 20" Cylindrical Grinder	1982

LANDIS MODEL 1R 10" X 20" CYLINDRICAL GRINDER SERIAL NUMBER: 883-73 Approximate Year: 1982 Specifications: General: Nominal Work Swing: 10" Nominal Distance Between Work Centers: 20" Maximum Diameter Work Standard Machine Will Grind With Full Size Standard Wheel: 10 7/8" Minimum Diameter Wheel To Grind Zero Diameter Work On Centers: 10 1/2" Height From Floor To Work Centerline: 41 3/4" Work Carriage: Traverse Speed: 2"-240" I.P.M. Carriage Traverse: 0.200" Per Turn Of Handwheel Swivel Trable Graduated: 4" Per Foot Degrees Included Angle: 20 Degrees Work Rest Capacity: 1/4" To 4" Wheel And Wheelfeed: Standard Grinding Wheel: 12" x 1" x 5" Maximum Width Of Grinding Wheel: 1 1/2" Grinding Wheel Speeds: 2,000 And 2,530 RPM Minimum Diameter Of Worn Grinding Wheel: 7 1/2" Maximum Distance Wheel Centerline To Work Centerline: For Machines With Hand Wheelfeed: 11 1/2" For Machines With Hydraulic Infeed: 12 1/2" Minimum Distance Wheel Centerline To Work Centerline With Footstock Removed: 3 1/2" Work Diameter Reduction: Per Revolution Of Handwheel: 0.100" Per Revolution Of Fine Feed Knob: 0.001" Minimun Feed Graduations: 0.000050" On Diameter Maximum Hydraulic Infeed, On Diameter, For Machines With Hydraulic Infeed: 0.090" Rapid Infeed Stroke, For Machines With Hydraulic Infeed: 1" Grinding Wheelhead Swivel Range: 90 Degrees Each Way Internal Grinding Spindle Speeds: 16,500 RPM Headstock: Headstock Work Center: #10 Jarno Footstock Work Center: #6 Jarno Headstock Swivel Range: 120 Degrees Work Speeds: 60, 90, 150, 225, 400 And 600 RPM Diameter Hole Through Spindle: 1" Headstock Spindle Nose: 5A2 Equipped With: JIC Electrics And Controls Approximate Dimensions: Approximate Weight: Specifications Are Subject To Verification (INVENTORY #12694)