 Click to see video of this machine |
|
|
KING 42" VERTICAL TURRET LATHE SERIAL NUMBER: 3025 Lot Number: 401 * SEE IT RUN IN OUR UNDER POWER VIDEO * Specifications: Maximum Swing: 48" Maximum Swing Under Turret: 36" Speeds: 6.7 To 200 RPM (24) Feeds: .003 To .500 IPM On All Axes Equipped With: Pendant Control With Push Button Controls For Elevation, Rapid Travel And Chuck Start And Jog 5 Station Turret Head, Tilts 30 Degrees Left And Right, 36" Vertical Travel, 33" Cross Travel 1 Side Head With 4 Side Toolpost, 24" Travel 1 Boring Swivel Head, (30 Degrees), With 24" Hydraulic Movement 42" Diameter 4 Jaw Independent Scroll Type Chuck With Step Jaws And 12 Position Jaw Mounts Factory Tracer Attachment On Boring Head, Boring Head Tilts 55 Degrees Left Or Right Feed And Rapid Movement On All Work Heads Graduated Hand Dials On All Axes Miscellaneous Tooling, Boring Bars, Cutters, Etc. (See Photo) Rear Mounted Main Electrical Panel With Main Disconnect Approximately 30 Gallon Coolant Tank With Gusher 1/2 HP Pump, 230/460 Volt, 1725 RPM, (Currently Wired For 460 Volts Approximately 1/2 HP Hydraulic Pump With 15 Gallon Tank, 220/460 Volt, (Currently Wired For 460 Volts) 30 HP, 220/440 Volt, 1450 RPM, 3 Phase Main Motor (Currently Wired For 440 Volts) Flush To Floor - Later Design Miscellaneous Prints Included Approximate Dimensions: 8' 10" FB x 11' 3" LR x 11' 9" H, (Flat On Floor) Approximate Weight: 38,000 Lbs. Specifications Are Subject To Verification (INVENTORY #12658) |
|
|
|
|
|
|
|
|
|
|
|