|
|
DIVERSA TECH DMT/VMC 4 AXIS CNC VERTICAL MACHINING CENTER SERIAL NUMBER: 0023-1224F MODEL: DMT/VMC 1224 Approximate Year: 1998 Specifications: Table: 22 1/4" FB x 51" LR Table Travel, Left-Right: 50" (Soft Limit) Saddle Travel, In And Out: 23" Head Travel: 34" Extra Large, Maximum Distance Under Spindle Nose: 43 1/4" To Table Feed Rates: 1-2,000 mm/pm Spindle Speeds: To 10,000 RPM Spindle: Cat 40, (Sorry, No Tool Holders Included) Equipped With: Fanuc 15-M CNC Control With Pendant Control And Hand Heald Sub Control X, Y, Z And A Control Prewired For 4th Axis, (A), (No Headstock Or Tailstock) 24 Position Automatic Tool Changer, Umbrella Style Box Hard Ways Power Draw Bar RS-232 Port Accordion Way Chip Covers Rear Splash Guards Chip Auger At Rear Of Table With Baldor 1/8 HP Motor Coolant System With 1/4 HP Coolant Pump And Approximately 40 Gallon Tank Electric Enclosures At Side/Rear 10 HP, 200 Volt, 4 Pole Spindle Motor Both Table And Saddle Are Powered By Fanuc 150 Volt, 7.6 RPM, 200 RPM Maximum, 3 Phase Motor This Machine Was Used In A Wood Pattern Shop Priced Lower Than A Late Model Bridgeport Mill Approximate Dimensions: 114" x 107" x 9' H Flat On Floor, 114" x 94" x 9' H With Auger Motor Removed And Flat On Floor Approximate Weight: 15,000 Lbs. |
|
|
|
|
|
|
|
|