|
|
GOSS & DELEEUW MODEL 1-2-3 TWENTY ONE SPINDLE AUTOMATIC CHUCKER SERIAL NUMBER: 2320 Approximate Year: 1967 Specifications: (21) Spindles: Nose Size: 2 11/16" Bore For Tool Shanks: 1 1/2" Spindle Speeds: Up To 3,000 RPM Threading Speeds: Up To 6,000 RPM Equipped With: 4 Station Rotary Turntable 7 Mill/Drill Stations With 25 HP Leeson Drives Universal Cam Drive: Slides Are Driven By Hardened, Universal Cams, Which Eliminates Cam Changes Between Jobs. Trip Dog Adjust- ment Provides For A Large Range Of Feed Strokes. Lead Screw Threading: Insures Accuracy Of Thread Pitch And Affords Better Tap And Chaser Life. Simplicity Of Design And Construction: Assures Dependable Operation. Slides Are Cam Driven. Indexing, Chucking, Dwell And Traverse Mechan- ically Interlocked. Positive Geneva Index And Lock Pin Design: Assures Accurate Work Positioning. Exclusive Boring And Threading Slides. Adjustable Electric Chucking: The Hardened Steel Two Jaw Chuck's Pressure Can Be Varied To Suit Job. Micrometer Adjustment: Of Machining Spindles To Speed Up Changeover. Preloaded Precision Bearings: Protected From Chips And Dirt By Labyrinth Seals. Extra Heavy Cast Iron Bed With Hardened And Ground Bedways: Mounts Directly On Floor. Front Right Motor: 20 HP, 460 Volt, 880 RPM, 3 Phase Front Left Motor: 15 HP, 208-220/440 Volt, 900 RPM, 3 Phase Back Motor: 15 HP, 460 Volt, 780 RPM, 3 Phase This Goss & DeLeeuw One-Two-Three Tool Rotating Automatic Chucker Has 21 Spindles For Machining Converter And Faucet Fixture Bodies. It Is An Amazing Machine That Produces Parts With As Many As Nine Ends In A Single Chucking. By Stacking The Conventional Seven Spindles Three High, This Goss Automatic Chucker Can Turn Out Complex Work Pieces Such As Convertor Bodies From Rough Casting To Finished Product In A Single Cycle . . . On A Single Tooling Set Up . . . And At High Production Speeds. It Also Machines Pieces With Fewer Ends, (Such As T-Fittings), At Twice The Normal Production Rate By Gripping The Pieces In The Upper And Lower Banks And Chucking Them Two At A Time. Al Threading Spindles Can Be Arranged For Double Threading, And The Lower Three Threading Spindles Can Be Arranged To Cut Right Or Left Hand Threads, Independent Of The Others Why Waste Money Machining One End At A Time? Great Machine For The Brass Plumbing Industry! Parts Available From Goss & DeLeeuw Approximate New Price When Purchased: $68,000.00 USD, Plus Approximate Dimensions Of Machine: 92" D x 132" W x 86" H Approximate Dimensions Of Coolant Tank: 40" x 32" x 18" H Approximate Total Weight: 18,660 Lbs. |
|
|
|
|
|