Inventory Number	Description	Year	Asking Price
12212	LeBlond 16" x 54" CC Servo Shift Tool & Die Maker's Engine Lathe	1970

LEBLOND 16" X 54" CC SERVO SHIFT TOOL & DIE MAKER'S ENGINE LATHE SERIAL NUMBER: 5HD-245 Approximate Year: 1970 Capacity: Swing: 16" Actual Swing Over Bed And Carriage Wings: 18 3/4: Distance Between Centers: 54" Size Of Tool-Forged: 5/8" x 1 1/4" Size Of Tool Holder: 5/8" x 1 3/8" Headstock: (16) Spindle Speeds: 20 To 1,550 RPM Gear Drive: 20, 27, 36, 48, 62, 84, 112, 150, 206, 278, 364, 492 RPM Belt Drive: 648, 876, 1150, 1550 RPM Front Spindle Bearing Timken "Zero" Precision, Outside Diameter: 6 1/2" Radial Load At 100 RPM: 13,600 Lbs. Thrust Load At 100 RPM: 13,400 Lbs. Center Spindle Bearing Timken "Zero" Precision, Outside Diameter: 5 7/8" Radial Load At 100 RPM: 9,400 Lbs. Rear Spindle Bearing: Ball Bearing, Outside Diameter: 4.922" Radial Load At 100 RPM: 6,080 Lbs. Spindle, Size Of Hole, Straight: 1 49/64" Spindle Hole, Size Of Taper: No. 200 American Standard Spindle, Size Of Center: Morse Taper No. 4 Spindle Nose, Taper Key Drive: L-1 Spindle Nose, Diameter Large End Of Taper: 4 1/8" Headstock Length On Bed: 26 7/8" Feeds And Threads: (96) Feeds: Gear Drive: .0018 To .104 P.S.R. Belt Drive: .0006 To .0347 P.S.R. (48) Threads: 2 - 112 I.P.R. Equipped With: Flame Hardened Ground Bedways, Removable From From Bed For Refinishing, When Needed Thread Dial Graduated Hand Dials On Carriage Front Mounted Push Button Controls With Indicator Light Spindle Engagement Lever At Head And Carriage With Brake Six Position Adjustable Turret Style Carriage Stop Adjustable Dogs To Disengage Feeds And Threads, (Located On Lower Bed Shaft) Cushman 12" Diameter 3 Jaw Self Centering Scroll Chuck With Removable/Reversable Jaws Heavy Duty Tailstock With Cam Lever Bed Clamping And Spindle Clamp Adjustment On In And Out For Calibration, No. 4 Morse Taper Nose, Adjustable Graduated Dial Indicator Steady Rest, Brass Tipped, (This Does Not Appear To Be Made By LeBlond, But It Does Fit And Can Be Used With Up To 4" Stock) Chuck Chip Guard Four Position Turret Style Toolpost 14" Face Plate 11" Face Plate/Sine Plate (7) Indexable Square Shank Cutters (1) Live Center (1) Dead Center (1) Jacobs Drill Chuck Work Lamp Set Of Machinery Leveling Pads Tray Top Type Head To Rest Frequently Used Tools, Such As Chuck Keys, Wrenches, Cutters, Etc. Removable Chip Tray With Screened Coolant Flow To A Built-In Coolant Tank And Pump Located At Lower Foot End Of Lathe Coolant Flow Valve Mounted To Carriage Rear Mounted Electrical Panel Equipped With Magnetic Motor Starters And Relays Fused Master Disconnect 110 Volt Control Voltage Adjustable Rheostat Controls For Clutch, Brake And Jog Low Voltage Auxiliary Box 10 HP, 208-220/440 Volt, 27-25-12.2 Amp, 3 Phase, 1800 RPM Motor (Hooked Up For 220 Volt, 3 Phase, 25 Amp, Fused In Panel @ 40 Amp For Start Up Draw) This LeBlond Lathe Has A Powerful 10 HP Drive System Copy Of Book And Electrical Schematic Included Approximate Dimensions: 10' 6" x 4' x 4' 6" H Approximate Weight: 5,400 Lbs.